Sneak Preview of the Complete Battery Reconditioning Report

Do it Yourself Battery Reconditioning
by the Battery Geek

Table of Contents
Introduction
Who am I and why am I Qualified
Tips to Prolong the Life of NiCd or NiMh Batteries
Tips to Prolong the Life of Lithium-based Batteries
Investing in a Good Smart Charger
Why Batteries Need to be Reconditioned
How to Test your Battery with a Voltmeter
How to Test your Batteries with a Battery Analyzer
How to Recondition a Battery without a Battery Analyzer
How to Recondition a Battery with a Battery Analyzer (The Best Way)
How to Rejuvenate a Battery
How to Revert a Reversed Cell
How to Recondition Lead Acid Batteries (Automotive)
Appendix
Glossary of Common Battery Terms





Disclaimer

This is an informational product only. We are not responsible for any injury or damage that occur. All procedures in this ebook should be done a pair of safety goggles and a pair of voltage resistant gloves. Also, it is very important that you not wear any jewelry while dealing with batteries.

Although these principles can be used with car batteries or any other Lead Acid batteries This ebook does consider them throughout. Take extra precaution when dealing with them. These batteries must be charged and discharged in a well ventilated area. Use goggles and acid gloves and aprons when handling these types of batteries.


Danger
Never connect a batteries negative terminal to another batteries positive terminal and then also connect the other 2 terminals. An explosion and/or a fire could occur as a result.

Never connect a battery in reverse polarity to any instrument that was not designed to do so.



Introduction

I have tried to write this informational ebook in a way that anybody can understand. You don't have to be a geek to understand what I'm talking about. I'm the geek - not you. 

I try not to use a term that a non-geek would understand but sometimes this is impossible. So I have provided a Glossary of Common Battery Terms in the Appendix.

So if you find something confusing, please let me know so that first of all I can explain it so that you understand but also so that I can make the changes and others can understand it as well. Email me for any questions here.

If you are a geek like me, let me greet you in the geek way - Live long and prosper. I hope that you will find it useful information. If not, let me know how to improve it by emailing me here. 

OK. So now you have bought this ebook and you are ready to recondition your batteries. Right? That be correct IF you already have battery analyzer like the CBAII. However, if you don't have this yet, don't fret. You could possibly get one in have it in 2-6 days if you don't delay and order within 24 hours.

I know that I hate when I buy information like you did here and you find out that there are additional hidden costs in achieving the results that was presented to you. So that is why I told you upfront that the only other thing that you need is battery analyzer that can be bought for about $120.

We sell a battery analyzer that is very cost effective and works very well. The Computer Battery Analyzer IIor CBAII measures and records a graphical display of your batteries performance on your computer. All you need is a USB port.

It will test any kind of battery. Test at up to 40 amps, 150 watts or 48 volts, whichever is higher.

So if you still need order one, do it now. You can read this while you wait:

http://www.Battery-Reconditioning.com/CBA.htm


So I am assuming you are alright with this situation and that I won't get any angry customers that didn't know. There is a way to recondition your batteries without a battery analyzer if you can build a circuit and use a voltmeter.

You will also be pleasantly surprised that there are all sorts of tips and common things that you can do to help improve the charge capacity of your battery and help you increase the life of your batteries in this ebook as well.


Who am I and why am I Qualified

The short answer is - I am an electronic technician with additional experience in the power tool industry. I received my Associate of Applied Science in Electronics degree in 1989. Since then I have worked at a company that manufactured pacemakers and implantable defibrillators. I worked at NASA and I worked for Texas Instruments. All as an electronic technician.

During this time I went a step further and achieved certifications as a Biomedical Electronic Technician and a Industrial Electronic Technician. After 15 years in the industry, I reached the top of my pay grade and worked on starting my own business. 

So I started selling Bosch and Skil Power Tools on the internet and I noticed a trend in power tool batteries - it's fairly obvious and common to everybody - rechargeable batteries don't last forever and they need to be replaced. Also another factor contributing to this problem is that batteries are most often THE most expensive component in the power tool. So trying to attack this problem has become my goal.

Sorry, you will have to by the Battery Reconditioning Report to see the rest of it...